CeMAP Brightspace Exams: 2026 Remote Invigilation Walkthrough

A CeMAP Brightspace exam is an online exam you sit on your own computer, watched by a remote invigilator through your webcam. Since 13 January 2026, every CeMAP candidate on the current structure takes all five units this way, on Brightspace, the learning platform run by Walbrook Institute London (formerly LIBF). There's no test centre and nothing to book.

That sounds simple, and mostly it is. But in the months since the switch, the questions our students ask us have changed. They used to ask which Pearson VUE centre was closest. Now they ask whether a work laptop will do, how big the room scan needs to be and what happens if the Wi-Fi drops. This walkthrough answers those questions, using only what Walbrook publishes on its exam pages, checked in November 2026, plus what we've seen from our own students since the change.

The short answer

To sit a CeMAP Brightspace exam, you log in to Brightspace on a PC or laptop with a camera and microphone, open the exam for your unit, show your ID, scan the room through 360 degrees and then answer the questions under remote invigilation. No booking is needed and you can start whenever you're ready.

The preparation that matters happens before exam day: the right device, a quiet room you can clear, a system check on the same connection you'll use, and enough revision that you're comfortably above the 70% pass mark.

What is Brightspace, and why does CeMAP use it?

Brightspace is Walbrook's online learning hub. On its exam and assessment information page, Walbrook says all learning and assessments for its professional qualifications are accessed through it, so the same site holds your study materials, your practice exams and the real exams.

For CeMAP, that means the exam isn't a separate system you have to register with. You don't create an account with a test provider or pick a slot. Once Walbrook has your registration, the exam for each unit sits inside Brightspace and stays open until you either complete it or your registration expires.

In our experience, this is a genuine improvement. Under the old model, students booked dates weeks ahead and then either sat before they were ready or waited around after they were. Now you sit when your practice scores say you're ready, and the only deadline is your registration window: 18 months for the full qualification, or 12 months for a single module.

What happened to Pearson VUE CeMAP exams?

Pearson VUE no longer runs CeMAP exams. Walbrook stopped examining the previous version of CeMAP on 12 January 2026, and from that date exams can only be sat online on Brightspace under the new structure.

Walbrook says transferred learners were given a fresh 12 months, with old passes converted to credit on the new units. If you started before September 2025 and aren't sure where you stand, log in to MyLIBF or call Walbrook rather than relying on an old forum thread. Our post on the LIBF and Walbrook rebrand explains why you'll still see both names.

What equipment do you need for a CeMAP Brightspace exam?

You need a PC or laptop with a working camera and microphone, a reasonable internet connection and appropriate ID. Walbrook says any PC or laptop will do, with no software installs, plug-ins or extensions, and that the exams are built to cope with slower connections.

• A computer, not a tablet. Walbrook is explicit that tablets and mobile phones can't be used to complete the exam.
• A camera you can move. The camera has to be manoeuvrable for the room scan. A laptop's built-in webcam works because you can turn the laptop. A webcam clipped to a fixed monitor needs a long enough cable to pick up and turn.
• A microphone. Built-in is fine, as long as it's switched on and not muted at system level.
• Your ID. Walbrook asks you to have appropriate identification to hand. Check the current ID rules in your Walbrook account before the day, and make sure the name matches your registration.
• A device that meets the minimum requirements. Walbrook links to its invigilation partner's requirements page, so check it in advance rather than assuming.

How do you run the system check before your exam?

Walbrook's CeMAP exam pages point to a system check run by its invigilation partner, Integrity Advocate, and asks you to run it on the same device and internet connection you'll use for the exam. Do it at least a day before your first unit, not ten minutes before.

The "same device, same connection" part is what people skip. A check that passes on your home Wi-Fi tells you nothing about the office network, and a check on your partner's laptop tells you nothing about yours. Sit at the desk you'll use, on the network you'll use, and run it there.

How should you set up your room for the 360-degree scan?

Immediately before each exam, you'll use your webcam to do a full 360-degree scan of the space where you're sitting. The aim is to show the invigilator that nobody else is there and nothing on your desk or walls could help you.

Walbrook doesn't publish a detailed list of what must be cleared, so we tell our students to set the room up as if a strict invigilator were standing behind them:

• A quiet room with the door closed, and anyone else at home told you're not to be disturbed for the full exam time.
• A clear desk: no notes, books, sticky notes, phone or second screen within reach.
• Walls in view checked for whiteboards, wall planners or revision posters, and anything with writing on it removed or covered.
• Good light on your face, so the camera can see you clearly throughout.

If you can't clear a room at home, a quiet, private room elsewhere works. A shared office or café won't, because you can't control who walks into shot.

Step by step: sitting a CeMAP exam on Brightspace

On the day, the sequence takes a few minutes before the questions start. The exact screens may change as Walbrook updates the platform, but the order generally runs like this:

1. Close everything else. Shut down messaging apps, email, extra browser tabs and any VPN before you log in.
2. Log in to Brightspace with your Walbrook details and open the module you're sitting.
3. Open the exam for the unit you're ready to sit, for example MRT1.
4. Allow camera and microphone access when your browser asks. If you block it by accident, fix the browser permission before you go further.
5. Show your ID to the camera when prompted.
6. Do the 360-degree room scan, slowly, including your desk surface.
7. Sit the exam. Stay in your seat and in view of the camera until you've submitted.

The tech is the easy part. The students who struggle on Brightspace are the ones who open the exam before they're ready, because nothing stops them. Jay Lee, uAcademy

How long is each CeMAP exam on Brightspace?

Four of the five units are one-hour exams and ASEW/ASSC is two hours. The pass mark is 70% on every unit, and each unit is passed or failed on its own.

Walbrook says units can be sat back to back or on separate days. Toilet breaks aren't allowed during an exam, so if you're sitting two units in a row, take your break between them, not during. Pass all five and Walbrook awards the Certificate in Mortgage Advice and Practice, the qualification the Financial Conduct Authority (FCA) expects mortgage advisers to hold before they advise without supervision. Our guide to the CeMAP exam structure covers what each unit tests, and our post on the CeMAP pass mark explains how many marks you can afford to drop.

What are the common pitfalls in CeMAP remote exams?

Most problems we hear about aren't about the questions at all. They come from the set-up, and nearly all of them are avoidable.

• Sitting on a work laptop without asking IT. Firewalls and VPNs are the problem Walbrook itself flags. Sort it a week ahead, not on the morning.
• Running the system check on a different network. It has to be the same device and the same connection.
• Forgetting there's no toilet break. MRT1 is 50 questions in an hour and ASEW/ASSC runs for two hours. Plan accordingly.
• A messy room or a busy house. Someone walking in, or notes left on the wall, is exactly what the scan and invigilation are there to catch.
• Sitting too early. Because there's no booking, it's tempting to "just have a go". Your first attempt is included in the registration fee, but a resit costs £120 per unit. We suggest waiting until you're scoring 80% or more on practice questions you haven't seen before.

Our CeMAP revision guide sets out how to plan the final weeks so you open the exam at the right moment.

What if something goes wrong during your CeMAP exam?

If you hit a technical problem, contact Walbrook's Customer Services team on +44 (0)1227 818609, Monday to Friday, 8.30am to 5.30pm UK time. Walbrook doesn't publish a set procedure for exams interrupted by technical failure, so explain exactly what happened and when, and keep a note or screenshot if you can.

Because the exams can be sat day or night, it makes sense to sit your first unit during Customer Services hours. If something does go wrong, you can call straight away rather than waiting until Monday. Once you know your set-up works, evenings and weekends are fine.

For registration, fees and resits, the costs are paid to Walbrook and are separate from any course you use to prepare. Walbrook charges £735 for the full qualification, £330 for FSRE and £320 for MORT, with resits at £120 per unit. You book a resit through MyLIBF. Our CeMAP cost calculator adds these up for your own plan, and our guide on how to book your CeMAP exam covers registration step by step.

Frequently asked questions